DIY clock SH-E878 *
This is a very simple DIY clock you can build. Parts are available on eBay. You will need to have a soldering iron and some solder. This works on a 5-12 volt power supply.
Popular posts from this blog
Cable clips for small cables *
Cable clips for small cables Are these cable clips any good, well yes and no.....if you use them sensibly they will work well. Ideal for Christmas lights and tidying up mobile phone cables. If you use on large cable they will fall off probably. The adhesive side does not hold to the wall etc.
connecting ONVIF CCTV camera YCC365 to iSpy ispyconnect *
connecting ONVIF CCTV camera YCC365 to iSpy ispyconnect https://sites.google.com/view/fxv300tech/raspberry-pi-4 connecting ONVIF CCTV camera YCC365 to iSpy ispyconnect Connecting ONVIF camera to Xeoma Video Surveillance app using a Raspberry PI 4 How to Configure a static TCP/IP IP Address - Raspberry PI 4 Building PI 4 using a GeekPI case for the Raspberry PI 2 PI 3 or P1 4 Temperature sensor script Raspberry PI 4 Blinking Red LED on Raspberry PI 4 and Breadboard powering Using PI 4 GPIO signals to control a 74LS00 NAND Gate Wiring a 2 Way Switch Controlling 4N35 optocoupler using a GPIO signal from Raspberry PI 4 or Arduino Temperature sensor script using 74HC595 to output result to TIL311 display
Comments
Post a Comment