DIY clock SH-E878 *
This is a very simple DIY clock you can build. Parts are available on eBay. You will need to have a soldering iron and some solder. This works on a 5-12 volt power supply.
Popular posts from this blog
connecting ONVIF CCTV camera YCC365 to iSpy ispyconnect *
connecting ONVIF CCTV camera YCC365 to iSpy ispyconnect https://sites.google.com/view/fxv300tech/raspberry-pi-4 connecting ONVIF CCTV camera YCC365 to iSpy ispyconnect Connecting ONVIF camera to Xeoma Video Surveillance app using a Raspberry PI 4 How to Configure a static TCP/IP IP Address - Raspberry PI 4 Building PI 4 using a GeekPI case for the Raspberry PI 2 PI 3 or P1 4 Temperature sensor script Raspberry PI 4 Blinking Red LED on Raspberry PI 4 and Breadboard powering Using PI 4 GPIO signals to control a 74LS00 NAND Gate Wiring a 2 Way Switch Controlling 4N35 optocoupler using a GPIO signal from Raspberry PI 4 or Arduino Temperature sensor script using 74HC595 to output result to TIL311 display
Building and setting up SH E878 clock
Building and setting up SH E878 clock https://sites.google.com/view/tecchie/home
Comments
Post a Comment